BTEC Level 3 Diploma in Electrical and Electronic Engineering

Limited places available!

For further information and advice about Engineering Apprenticeships please contact us:

Email : Julie Burns

apprenticeships@setatraining.com
 

Duration: 1 or 2 years

Cost

Please contact Julie Burns for funding details

Location

Location:
SETA TRAINING CENTRE AND SKILLS CENTRE

18 Hammond Avenue
South Reddish
Stockport,
SK4 1PQ

This course can also be delivered on company premises.

This course can be a stand-alone qualification for people who have a specific interest in maintenance engineering or a component requirement for an Advanced Apprenticeship.

It is a nationally recognised qualification which can lead to employment as a technician and also provides progression to higher level qualifications including Degree or HND.

How long will it take me to achieve this qualification?

The usual duration for this qualification is 2 academic years.
Some employers wish to fast track learners to HNC and SETA facilitate this with the 1 year 2 days a week option. This option is very challenging and is only for those learners who are highly motivated and have very good GCSE results. Many mature learners undertake the 1 year option.

Entry requirements

To undertake this course you must achieve a minimum of 4 GCSEs at grades A*- C, including Maths, English Language and a Science. Due to the content of this qualification and potential progression GCSE A*-B is preferred in Maths.

A core element of engineering courses at SETA is maths. It underpins all that you will do as engineers from completing calculations for simple electrical circuits to more complex multistage calculations and even advanced simultaneous equations when studying ‘Kirchoffs Laws’.

Whatever level you are studying maths for engineering will be an important part of your course.

What topics will I study?

You will study 5 mandatory units:

  • Health and Safety in the Engineering Workplace,
  • Communications for Technicians,
  • Mathematics for Engineering Technicians,
  • Electrical and Electronic Principles
  • Engineering Project (work based).

 

The remaining speciality units are typically

  • Business Operations in Engineering,
  • Selecting and Using Programmable Logical Controllers,
  • Electrical Technology,
  • Electronic Measurement and Testing,
  • Principles and Applications of Analogue Electronics,
  • Electronic Fault Finding,
  • Three-Phase Motors and Drives
  • Further Electronic Principles.
    Other units are available and actual content can be revised to meet employer needs.

How will I be assessed?

The units are assessed in compliance with the awarding body requirements. Most units use assignments which can be a mix of theory and practical assessment. Unit achievement is graded as Pass, Merit or Distinction and the overall qualification is also graded to reflect learners unit achievement.

What our students say:

What our students say….

When I don’t understand I only have to ask
and it will be explained in different ways
until I understand”

Good experience”
“It’s really good and fun”

SETA programmes also includes enrichment activities and industrial visits where possible.

SETA is active in supporting charities and throughout the academic year fun activities are planned to support the chosen charities.

All employers are informed about events to ensure suitability for learners and in many cases support and involvement from the employers.

Questions?

The course starts in September 2016.

Later start dates are available subject to demand.

To apply please contact Julie Burns:

jburns@setatraining.com

Need an in-house training course?

We can provide bespoke training packages to meet your needs at a location of your choice
Find out more
Leading training providers require an Electrical Engineering Trainer / Assessor.

Leading training providers require an Electrical Engineering Trainer / Assessor.

NEBOSH National General Certificate (Day Release)

NEBOSH National General Certificate (Day Release)

Level 5 NVQ Diploma in Occupational Health & Safety Practice (3654-06)

Level 5 NVQ Diploma in Occupational Health & Safety Practice (3654-06)

IOSH Managing Safety for Construction Managers

IOSH Managing Safety for Construction Managers

City & Guilds 18th Edition 1 Day 17th Edition Update Course

City & Guilds 18th Edition 1 Day 17th Edition Update Course

City & Guilds 18th Edition 2018 3 Day Programme

City & Guilds 18th Edition 2018 3 Day Programme

ISO Internal Auditor Course

ISO Internal Auditor Course

NEBOSH HSE Certificate in Health & Safety Leadership Excellence

NEBOSH HSE Certificate in Health & Safety Leadership Excellence

CCNSG Passport to Safety

CCNSG Passport to Safety

NEBOSH HSE Certificate in Process Safety Management

NEBOSH HSE Certificate in Process Safety Management

NEBOSH National General Certificate (Block)

NEBOSH National General Certificate (Block)

HSE Face Fit Dust Masks

HSE Face Fit Dust Masks

Confined Space Awareness

Confined Space Awareness

5 day Mechanical Maintenance Programme

5 day Mechanical Maintenance Programme

Fitting and Safe Use of Hand Tools 5 Day Programme

Fitting and Safe Use of Hand Tools 5 Day Programme

PLC Awareness 3 Day Programme

PLC Awareness 3 Day Programme

Test Equipment and Fault Diagnostic

Test Equipment and Fault Diagnostic

Inverters and soft starters 3 Day Programme

Inverters and soft starters 3 Day Programme

Single & 3 Phase Motor Controls and Drawings

Single & 3 Phase Motor Controls and Drawings

MIG, TIG, MMA Welding Programmes

MIG, TIG, MMA Welding Programmes

Fundamentals of Electricity

Fundamentals of Electricity

Electrical Safety 2 Day Programme

Electrical Safety 2 Day Programme

Warehouse Safety Training Course

Warehouse Safety Training Course

NEBOSH National Certificate in Fire Safety and Risk Management

NEBOSH National Certificate in Fire Safety and Risk Management

NEBOSH Health and Safety at Work Qualification

NEBOSH Health and Safety at Work Qualification

Abrasive Wheels Safety Training Course

Abrasive Wheels Safety Training Course

IOSH Working Safely

IOSH Working Safely

Nebosh International General Certificate Occupational Health and Safety Training Course

Nebosh International General Certificate Occupational Health and Safety Training Course

IOSH Managing Safely

IOSH Managing Safely

NEBOSH National Construction Certificate

NEBOSH National Construction Certificate

Manual Handling Operations Training Course

Manual Handling Operations Training Course

Supervising Safely – IOSH Certificated Training Course

Supervising Safely – IOSH Certificated Training Course

HNC Diploma in Mechanical Engineering (BTEC)

HNC Diploma in Mechanical Engineering (BTEC)

HNC Diploma in Electrical and Electronic Engineering (BTEC)

HNC Diploma in Electrical and Electronic Engineering (BTEC)

Electrical Duty Holders Certification

Electrical Duty Holders Certification

Hand Tools Safety Training

Hand Tools Safety Training

Fire Marshall Training

Fire Marshall Training

Power Press Safety Training Course

Power Press Safety Training Course

Risk Assessment

Risk Assessment

Erection And Use of Portable Scaffolding

Erection And Use of Portable Scaffolding

Working at Height Training Course

Working at Height Training Course

Slinging Safely Training Course

Slinging Safely Training Course

The City & Guilds Level 3 Certificate in Occupational Health and Safety

The City & Guilds Level 3 Certificate in Occupational Health and Safety

IOSH Safety for Executives and Directors

IOSH Safety for Executives and Directors

Manual Handling for Instructors – IOSH Approved Training Course

Manual Handling for Instructors – IOSH Approved Training Course

Environmental Awareness Training

Environmental Awareness Training

PUWER Assessor

PUWER Assessor

Construction Design And Management (CDM) Regulations 2015

Construction Design And Management (CDM) Regulations 2015

COSHH Regulations

COSHH Regulations

Accident Investigation

Accident Investigation

Investigation and Reporting Major Incidents

Investigation and Reporting Major Incidents

2 Day Pneumatics Programme

2 Day Pneumatics Programme

2 Day Programme Hydraulics

2 Day Programme Hydraulics

Corporate Manslaughter and Homicide Act 2007

Corporate Manslaughter and Homicide Act 2007

Forklift Truck Health and Safety Training  (in-company)

Forklift Truck Health and Safety Training (in-company)

Tungsten Inert Gas Shielded Welding Gas (TIG)

Tungsten Inert Gas Shielded Welding Gas (TIG)

Metal Inert Gas Shielded Welding (MIG)

Metal Inert Gas Shielded Welding (MIG)

Manual Metal Arc Welding (MMA)

Manual Metal Arc Welding (MMA)

Introduction to Tungsten Inert Gas Shielded Welding Gas (TIG)

Introduction to Tungsten Inert Gas Shielded Welding Gas (TIG)

Introduction to Manual Metal Arc Welding (MMA)

Introduction to Manual Metal Arc Welding (MMA)

Introduction to Metal Inert Gas Shielded Welding (MIG)

Introduction to Metal Inert Gas Shielded Welding (MIG)

Hand And Power Tools Program

Hand And Power Tools Program

BTEC Level 3 Diploma Operations And Maintenance Engineering

BTEC Level 3 Diploma Operations And Maintenance Engineering

City & Guilds Inspection And Testing Electrical Equipment PAT Electrical Training Course

City & Guilds Inspection And Testing Electrical Equipment PAT Electrical Training Course

Consultancy Services

Consultancy Services

General Machining Programme

General Machining Programme

NEBOSH International Technical Certificate Oil and Gas Operational Safety

NEBOSH International Technical Certificate Oil and Gas Operational Safety

BTEC Level 3 Diploma in Electrical and Electronic Engineering

BTEC Level 3 Diploma in Electrical and Electronic Engineering

Pin It on Pinterest