Welcome to SETA STOCKPORT

Health and Safety  Short Courses

Please contact us for further course information, advice and to book a course

We can provide bespoke training packages to meet your needs at a location of your choice

Warehouse Safety Training Course

Objective:
The objective of this course is to help prevent accidents and injuries whilst working in the
warehouse and loading dock

Pre-course requirements:
For supervisors, workshop, warehouse and store personnel and anyone else who handles
materials at work.

 

CLICK HERE TO FIND OUT MORE. 

Abrasive Wheels Safety Training Course - 27 September 2021

If you use abrasive wheels, you should be aware of the relevant Regulations which not only lay down safety rules concerning the wheels but also provide standards for those who mount, dress or otherwise maintain abrasive wheels.

CLICK HERE TO FIND OUT MORE. 

Asbestos Awareness

A 1/2 day course to ensure your company complies with the requirements of the Control of Asbestos at Work Regulations.

CLICK HERE TO FIND OUT MORE. 

Power Press Safety Training Course - 30 November 2021

The course is structured for:

Operators and personnel responsible for departments in which power presses or press brakes are situated.

OBJECTIVE:
The course meets the training requirements of PUWER 1998.

Users of hydraulic and direct driven press brakes have been strongly recommended within PUWER to adopt the same inspection procedures as those that apply to power press as defined in PUWER 1998

 

CLICK HERE TO FIND OUT MORE. 

Slinging Safely Training Course

OBJECTIVES:
To ensure that those responsible for lifting and slinging operations understand their own and their company’s legal obligations under the relevant regulations.

CLICK HERE TO FIND OUT MORE. 

Working at Height Training Course

With the timely introduction of the Work at Height Regulations employee safety when working at height has jumped sharply in focus. With a hierarchy of control measures and schedules relating to work equipment defined in the regulations this course helps attendees to understand these requirements.

OBJECTIVE:
The course meets the requirements of the training schedule.

CLICK HERE TO FIND OUT MORE. 

Accident Investigation

Objectives: Accident investigation is an important management tool, crucial for prevention, learning and/or dealing with insurance, litigation and the implementation of statute law.               

Aims: The course is designed to provide the information to enable delegates to carry out investigations,identify immediate and underlying causes and write a meaningful report thus enabling actions to be taken to prevent a reoccurrence.

Pre-course Requirements: Suitable for managers, safety advisors and safety representatives who may be involved in, or are responsible for accident investigation.

CLICK HERE TO FIND OUT MORE. 

Fire Marshall Training Course

The course is aimed at all staff in your workplace, particularly those who are designated as a Fire Warden or Fire Marshall. It will give them a greater awareness of the threats posed by fire, how to avoid a fire starting and spreading, and the action to be taken by a Fire Warden in the event of a fire and the day to day role (fire safety checks).

The course is specifically designed for persons who are responsible for the safe evacuation of other personnel in the event of fire, as well as for persons who are expected to deal with fires in the work situation.

CLICK HERE TO FIND OUT MORE. 

PUWER Assessor Training Course - 17&18 November 2021

Objectives:

  • To promote the use of PUWER Assessments and Checklists.
  • To ensure your company complies with the legal requirements placed upon them by Health & Safety Legislation.
  • To ensure attendees are familiar with and can competently use their companies PUWER Assessor Checklist.

CLICK HERE TO FIND OUT MORE. 

Manual Handling Operations Training Course

Objective: To demonstrate the safe methods of handling in various commonly encountered work situations.

Pre-course requirements: For Supervisors, Workshop, Warehouse and Stores Personnel and anyone else who handles materials at work.

PROGRAMME

  • Introduction to the Regulations
  • Risk Assessment
  • Accident Causation/Prevention
  • Correct Procedures for Lifting
  • Various Handling Techniques

CLICK HERE TO FIND OUT MORE. 

Hand & Power Tools Safety Training Course

The Safe Operation and Use of Hand & Power Tools Course (Experienced/Novice)

This training course is designed for any operative or supervisor who is required to use or supervise others during the use of hand tools and other similar machines in the workplace.

This course is a 1 or 2 day course which will include typical machines used by operatives. This course can be delivered at SETA or at your company and adapted to the specifications of the customer to concentrate on specific tools if you so wish.

CLICK HERE TO FIND OUT MORE. 

Risk Assessment (to include permit systems)

SETA employs a number of competent Safety Advisors who are available to provide services including risk assessments, surveys, departmental and full site safety audits.

A full report is provided, with appropriate recommendations. If required, audio-visual aids can be used to identify possible hazards.This is most useful if the survey is to be used in conjunction with safety training courses.

 

Risk Assessment

Introduction to Construction Design and Management (CDM) Regulations 2015

A half day course designed to introduce the requirements of the CDM Regulations 2015 and explain the roles and duties of;

The Client
The Principle Designer (PD)
The Principle Contractor (PC)
Designers
Contractors (and Sub Contractors)
Employees

CLICK HERE TO FIND OUT MORE.

Introduction to PUWER 98 Power Press Safety

Power Press Safety Training Course
The course is structured for:

Operators and personnel responsible for departments in which power presses or press brakes are situated.

OBJECTIVE:
The course meets the training requirements of PUWER 1998.

Users of hydraulic and direct driven press brakes have been strongly recommended within PUWER to adopt the same inspection procedures as those that apply to power press as defined in PUWER 1998.

CLICK HERE TO FIND OUT MORE. 

 

Services

What We Offer

Find out more about SETA’s full range of accredited NEBOSH and IOSH courses delivered by expert trainers and download the course schedule.  

We can provide bespoke training packages to meet your needs at a location of your choice – please contact us for more information!

N

GOLD NEBOSH PARTNER

N

IOSH ACCREDITED COURSES

HEALTH & SAFETY

Find out more about electrical and mechanical courses on offer and SETA’s bespoke programmes tailored to your company needs.

SETA offer competitive rates on all courses and offer excellent discounts to members and group bookings. We are also able to tailor programmes to develop and improve maintenance technician competency and skills. Get in touch to find out more!

TECHNICAL COURSES

Find out more about electrical and mechanical courses on offer and SETA’s bespoke programmes tailored to your company needs.

SETA offer competitive rates on all courses and offer excellent discounts to members and group bookings. We are also able to tailor programmes to develop and improve maintenance technician competency and skills. Get in touch to find out more!

ENGINEERING APPRENTICESHIPS

Choose a vacancy from the diverse range of roles and prestigious companies we partnered with: from precision engineering to welding and electrical maintenance we have something for you! 

SETA is one of the leading engineering training providers in the North West, helping young people succeed in engineering careers since 1966. Visit our Engineering Training Centre in Stockport!

Pin It on Pinterest

Share This