Welcome to SETA STOCKPORT

TECHNICAL SKILLS Training Course Directory

Please contact us for further course information, advice and to book a course

We can provide bespoke training packages to meet your needs at a location of your choice

BTEC Level 3 Diploma In Advanced Manufacturing Engineering (Electrical & Mechanical Pathways)

BTEC Level 3 Diploma In Advanced Manufacturing Engineering (Electrical & Mechanical Pathways)
It is a nationally recognised qualification for engineers and also provides progression to higher level qualifications including HNC or HND.

This work-based qualification is aimed at learners who are working in a broad range of occupations in the Engineering and Manufacturing sector.

Duration: 2 years

1-Day per week (720 GL)

CLICK HERE TO FIND OUT MORE.

Pearson BTEC Higher National Diploma (HND) in General Engineering

Overview
The Higher National Diploma (HND) in General Engineering is a one year, part-time/distance learning course. The course is a Level 5 programme and offers a chance to study independently, which will develop a broad range of skills such as report writing, communication and teamwork. These skills, coupled with the mandatory and specialist units studied, will provide you with the knowledge and expertise to work successfully as Electrical, Mechanical Engineer or Design Engineer.

CLICK HERE TO FIND OUT MORE. 

BTEC Higher National Certificate (HNC) in General Engineering

Overview
This programme offers a chance to study independently and develop a broad range of skills such as report writing, communication and teamwork skills. These skills and the mandatory and specialist units studied will provide you with the knowledge and expertise to work successfully as an Electrical or Mechanical Engineer.

The course runs for 2 years on a part-time learning basis.

CLICK HERE TO FIND OUT MORE. 

l

ELECTRICAL TRAINING COURSES

SETA offer competitive rates in all courses and offer excellent discounts to members and group bookings.

City & Guilds 18th Edition 1 Day 17th Edition Update Course

18th Edition Wiring Regulations BS 7671:2018 One Day Update Course

Objective:

This 1 day City & Guilds course will cover the changes from BS7671 2008 3rd amendment, to the new BS7671 2018 18th edition wiring regulations.

The course will be delivered over a 1 day period, with the exam on a separate day after a short period (usually a weekend) to revise

CLICK HERE TO FIND OUT MORE. 

City & Guilds 18th Edition 2018 3 Day Programme

City & Guilds 18th Edition Wiring Regulations BS 7671:2018 3 Day Programme

Objective:

This 3 day City & Guilds course will enable you to demonstrate a detailed knowledge as well as gaining familiarity with the layout, content and application of the IET Wiring Regulations 18th Edition known as BS7671:2018 Requirements for Electrical Installations.
This Certificate ensures you are up-to-date with the latest industry regulations on wiring and the safe use and operation of electrical equipment and systems. The course is aimed at those involved with the design, installation or testing of electrical installations in accordance with the 18th Edition of the IET Wiring Regulations.

CLICK HERE TO FIND OUT MORE. 

Electrical Safety 2 Day Programme

Objective: To provide delegates with the necessary knowledge skills and safe working practices to enable them to safely undertake a range of electrical tasks in an industrial environment.

Course duration: 2 days

Pre-course requirements:
Delegates can be in any of our three levels of achievement to attend this programme, but need this core two day course to progress to the next level of the fundamentals of electricity before moving on to be an instructed person going forward.

CLICK HERE TO FIND OUT MORE. 

l

MACHINING AND MECHANICAL TRAINING COURSES

SETA offer competitive rates in all courses and offer excellent discounts to members and group bookings.
Please e-mail Katie Potes kpotes@setatraining.com to find out more. 

General Machining Programme

General Machining Programme

SETA is a leading training provider in Manchester offering mechanical courses including maintenance skills, pneumatics and hydraulics.

5 Day General Machining Course provides knowledge to apply work holding techniques and correct machining methods for the production of work pieces by basic practice in turning and milling.

Course available on application, please contact Katie Potes on: 0161 480 9822 for more details

CLICK HERE TO FIND OUT MORE. 

5 day Mechanical Maintenance Programme

5 Day Mechanical Maintenance

Objective: To provide delegates with the necessary knowledge, skills and safe working practices to enable them to safely undertake a range of mechanical tasks in an industrial environment

Course duration: 5 days

Pre-course requirement: Delegates should have a basic understanding of the use of hand tools, along with an understanding of workplace health and safety.

Course available on application, please contact Katie Potes on: 0161 480 9822 for more details.

CLICK HERE TO FIND OUT MORE. 

2 Day Pneumatics Programme

Introduction to Pneumatics Programme

Objective: To provide delegates with the necessary skills, knowledge and safe working practices to enable them to safely carry out the care and maintenance of pneumatically actuated equipment including fault diagnosis

Course Duration: 2 days

Pre-course requirements: Delegates should have an understanding of basic engineering principles and workplace health & safety

Course available on application, please contact Katie Potes on: 0161 480 9822 for more details.

CLICK HERE TO FIND OUT MORE. 

2 Day Programme Hydraulics

Introduction to Hydraulics Programme

Objective:  
To provide delegates with the necessary skills, knowledge and safe  working practices to enable them to safely carry out the care &  maintenance of hydraulically actuated equipment including fault diagnosis.

Pre-course requirements:
Delegates should have an understanding of basic engineering  principles and workplace health & safety.

Outcomes: 
Successful completion of the course will result in the issue of a SETA Certificate of Completion.

Hydraulics/Pneumatics Course:

This hydraulics programme can be combined with pneumatics to deliver a joint programme to suit individual needs.

Course available on application, please contact Katie Potes on: 0161 480 9822 for more details.

CLICK HERE TO FIND OUT MORE. 

Services

What We Offer

Find out more about SETA’s full range of accredited NEBOSH and IOSH courses delivered by expert trainers and download the course schedule.  

We can provide bespoke training packages to meet your needs at a location of your choice – please contact us for more information!

N

GOLD NEBOSH PARTNER

N

IOSH ACCREDITED COURSES

HEALTH & SAFETY

Find out more about electrical and mechanical courses on offer and SETA’s bespoke programmes tailored to your company needs.

SETA offer competitive rates on all courses and offer excellent discounts to members and group bookings. We are also able to tailor programmes to develop and improve maintenance technician competency and skills. Get in touch to find out more!

TECHNICAL COURSES

Find out more about electrical and mechanical courses on offer and SETA’s bespoke programmes tailored to your company needs.

SETA offer competitive rates on all courses and offer excellent discounts to members and group bookings. We are also able to tailor programmes to develop and improve maintenance technician competency and skills. Get in touch to find out more!

ENGINEERING APPRENTICESHIPS

Choose a vacancy from the diverse range of roles and prestigious companies we partnered with: from precision engineering to welding and electrical maintenance we have something for you! 

SETA is one of the leading engineering training providers in the North West, helping young people succeed in engineering careers since 1966. Visit our Engineering Training Centre in Stockport!

TECHNICAL COURSES

SETA recognises that training needs to be flexible and to cover a range of technical needs. We run course programmes throughout the year covering mechanical and electrical maintenance multi-skilling, welding, machining, pneumatics and hydraulics. These can be enhanced by offering Engineering NVQ 2 and 3 units if required.

Improving electrical safety and operator awareness is an important area of plant operations. We offer 18th Edition Regulations and updates, PAT Testing, and Electrical Safety and fundamental courses.

We are able to tailor programmes to develop and improve maintenance technician competency and skills. If this is something you would like to consider please contact a member of the Business Development Team on 0161 480 9822.

We work with a wide range of employers and industries across the North West and the whole of the UK, including Manchester Airport, McVities, McCormick, Allied Bakeries, Astra Zeneca and many others.

Pin It on Pinterest

Share This